CALCULATORby General Informatics

Voltage drop calculator

Estimate voltage drop in copper or aluminium conductors using length, current, cross-section and circuit type.

Calculation

m
A
mm²
V

Not an electrical design or safety approval. Temperature, power factor, reactance and installation conditions are omitted. Consult a qualified electrician.

Your result

—

Voltage drop

Voltage drop

—
Voltage drop percent—
Estimated terminal voltage—

Formula and explanation

Single phase: ΔV ≈ 2 × length × current × resistivity / area. Three phase: √3 × length × current × resistivity / area. Simplified resistive model at 20°C.

Worked example

Example: 30 m copper, 16 A, 2.5 mm² at 230 V; see volts and percent drop.

Frequently asked questions

Why is this only an estimate?

Not an electrical design or safety approval. Temperature, power factor, reactance and installation conditions are omitted. Consult a qualified electrician.

Which assumptions are used?

Single phase: ΔV ≈ 2 × length × current × resistivity / area. Three phase: √3 × length × current × resistivity / area. Simplified resistive model at 20°C.

Not an electrical design or safety approval. Temperature, power factor, reactance and installation conditions are omitted. Consult a qualified electrician.

Choose language

Deutsch (DE)English (EN)Polski (PL)Español (ES)Français (FR)Italiano (IT)Nederlands (NL)

Legal notice